Current Position: Home >> PRODUCT >>  Flow meter >>  B类流量计

  • Describe

Product overview

Stress vortex flowmeter is a kind of velocity flowmeter. Based on Karman vortex street theory, piezoelectric crystal is used to detect the vortex frequency generated by fluid passing through vortex street generator in pipeline, so as to measure fluid flow. This series of vortex flowmeter is a well-designed product based on the comprehensive absorption of advanced technology in developed countries and the summary of many years of research and production experience. It realizes the intellectualization, standardization, serialization, generalization, production mold of products, and ensures the reliability of product quality. It has the characteristics of advanced circuit, low power consumption, wide range ratio, simple structure, small resistance loss, strong and durable, wide use, long service life, stable work, easy installation and debugging. It is widely used in petroleum, chemical industry, electric power, light industry, power heating and other industries. It can also be used for the flow measurement of fluid pipeline in urban water supply and medical industry.

characteristic:

1. No moving parts, long-term stability, simple structure, easy to install and maintain.

2. It has a variety of flow rate sensors, such as flow rate sensor, flow rate sensor and so on.

3. The  accuracy of liquid is ± 1.0% and that of gas is ± [A1] 1.5%.

4. The range of measuring range is wide, and the range of Reynolds number is 2 × 104 ~ 7 × 106, and it can reach 1:20.

5. Low pressure loss (about 1 / 4 ~ 1 / 2 of orifice flowmeter) belongs to energy-saving flow meter.

6. The installation method is flexible, and can be installed horizontally, vertically and obliquely at different angles according to different process pipelines on site.

7. The anti disturbance circuit and anti vibration sensor head are adopted, which has certain anti vibration performance.

8. Using ultra-low power microprocessor technology, a 3.6v10ah lithium battery can be used for more than 3 years.

9. The non-linearity of instrument coefficient is corrected by software to improve the measurement accuracy.

10. Small pressure loss and wide range.

11. EEPROM is used to protect the accumulated flow from power failure for more than 10 years.

Technical parameters:

Measuring medium: liquid, gas and steam

Temperature range: - 40 ℃ ~ 350 ℃

Pressure specification: PN1.6MPa, PN2.5MPa, PN4.0MPa, higher pressure specifications can be customized

Range ratio: normal range 1:10, extended range 1:15

Measurement accuracy: liquid indication ± 1%

Gas and steam indication ± 1.5%

Insert flow meter indication ± 2.5%

Power supply voltage: 24 VDC, 3.6 V lithium battery

Output signal: three wire system: pulse signal, 4-20mA current signal

Two wire system: 4-20mA current signal

Ambient temperature: - 40 ℃ - 55 ℃ (non explosion proof places)

Environmental humidity: relative humidity 5-85% RH

Signal remote transmission distance: ≤ 500m

Signal line interface: internal thread M20 * 1.5

Explosion proof grade: ExdIIBT4

Protection grade: ordinary IP65

Communication: HART communication protocol, RS485 communication interface

Instrument material: the converter shell is made of aluminum alloy, the body part is made of 1Cr18Ni9Ti stainless steel, or special material can be used according to the user's requirements

Recommend

  • Intelligent vortex flowmeter
    JKLU series vortex flowmeter
  • V-cone Flowmeter
    Jklv series V-cone Flowmeter
  • UUV-20series
    Intelligent electromagnetic flowmeter
  • Precession Vortex Flowmeter
    JKLU -Intelligent vortex flowmeter
  • Share:

Copyright © 浙江精控仪表有限公司 All Rights Reserved. 浙ICP备18010485号