Current Position: Home >> PRODUCT >>  Flow meter >>  A类流量计

  • Describe

Product introduction

UUV-20 Electromagnetic FlowMeter  works  based  on Faraday's  law of  battery induction.

Product  features

1.  It has the function of positive and negative two-way flow measurement;
2.  The converter has the function of local self-test;
3.  All Chinese (English) friendly interface, simple and clear operation.

purpose

It is used in heating, petroleum, chemical industry, steel, water conservancy, electric power, food, water supply and drainage, environmental protection, sewage treatment, pharmacy and other industries。

working principle

According to Faraday electromagnetic induction principle, a pair of detection electrodes are installed on the pipe wall perpendicular to the axis and magnetic line of force of the measuring tube. When the conductive liquid moves along the axis of the measuring tube, the conductive liquid cuts the magnetic line of force and generates an induced potential. The induced potential is detected by two detection electrodes, and the value is in positive proportion to the flow rate,

Its value is: e = b.v.d.k

Where:

E - induced potential;

K - coefficient related to magnetic field distribution and axial length;

B - magnetic induction strength;

V - average velocity of conductive liquid;

D - electrode spacing; (measuring inner diameter of tube)

The sensor takes the induced electromotive force E as the flow signal and transmits it to the converter. After the signal processing such as amplification, transformation and filtering, the instantaneous flow rate and cumulative flow rate are displayed by dot matrix liquid crystal with backlight. The converter has 4 ~ 20mA output, alarm output and frequency output. It also has RS-485 communication interface and supports Hart and Modbus protocol.

Technical Parameters:

Measuring medium: liquid, gas, steam

Temperature range: -40℃~350℃

Pressure specifications: PN1.6MPa, PN2.5MPa, PN4.0MPa, higher pressure specifications can be customized

Turndown ratio: normal range 1:10 extended range 1:15

Measurement accuracy: liquid, indicating value ±1%

Gas, steam indication value ± 1.5%

Plug-in flowmeter indication ±2.5%

Power supply voltage: 24VDC, 3.6V lithium battery

Output signal: three-wire system: pulse signal, 4-20mA current signal; two-wire system: 4-20mA current signal

Ambient temperature: -40℃-55℃ (non-explosion-proof location)

Environmental humidity: relative humidity 5-85%RH

Remote signal transmission distance: ≤500m

Signal line interface: internal thread M20*1.5

Explosion-proof grade: ExdIIBT4

Protection level: common type IP65

Communication: HART communication protocol, RS485 communication interface

Instrument material: The converter shell is made of aluminum alloy, and the meter body is made of 1Cr18Ni9Ti stainless steel. Special materials can also be used according to user requirements


Recommend

  • Precession Vortex Flowmeter
    JKLU -Intelligent vortex flowmeter
  • Orifice flowmeter
    Orifice flowmeter
  • V-cone Flowmeter
    Jklv series V-cone Flowmeter
  • Mass flowmeter
    JK-DMF Mass flowmeter
  • Share:

Copyright © 浙江精控仪表有限公司 All Rights Reserved. 浙ICP备18010485号